Product profile
The CY-KYN28A-12 series indoor AC metal-armoured mid-set switchgear (hereinafter referred to as the switchgear) is an advanced type of middle voltage switchgear. It applies to three-phase AC power systems with a rated voltage of 12 KV and rated frequency of 50 Hz to receive and distribute power and control, protect and inspect circuits.
Applicable standards
GB3906-2006 Alternating-current metal-enclosed switchgear and control gear for rated voltages above 3 kV and up to and including 35 kV
GB11022-1999 Common Specifications for High-Voltage Switchgear
IEC298(1990) AC Metal-Enclosed Switchgears and Control Equipment of Rated Voltage between 1 kV and 50 kV
DL404-97 Indoor AC High Voltage Switchgear Panel
Ambient temperature
•Ambient temperature: max. temperature +40°C; min. temperature -10°C;
•Ambient humidity: daily average relative humidity ≤ 95%; monthly average relative humidity ≤ 90%;
•Altitude: below 1,000 m;
•Seismic resistance: Seismic intensity should not exceed magnitude 8;
•The ambient air shall not contain any significant pollutant such as corrosive or combustible gas, steam, etc.;
•Free from severe pollution and frequent intense vibration. The severity design shall fulfill the requirements of Class 1; and
•For use in conditions other than the normal ones specified by GB3906, consultation shall be carried out between the user and the manufacturer.
Note:
1. Electric heating shall be employed in case of relative humidity greater than 70%;
2. For any location with an altitude over 1,000 m, the stipulations of JB/Z102-71 shall apply.