Product overview:

The CY-GCS LV draw-out switchgear assembly (hereinafter referred to as the switchgear) is a competitive product of the existing imported ones designed and developed by us, which is suitable to national circumstances, of high technical performance indexes and adaptive to the development of power markets, to fulfill the requirements of various designers and power consumers. It has been widely employed by power consumers. The switchgear applies to power distribution systems of power station, petroleum, chemical, metallurgy, textile and high-rise building industries.

The product complies with GB7251 Low-Voltage Switchgear and Control Gear Assemblies, JB T9661 Low Voltage Withdrawable Switchgear Assemblies and IEC60439 1 Low-Voltage Switchgear and Control Gear Assemblies.

Ambient conditions for use

•Temperature of ambient air: -5°C - +40°C; with the daily average temperature no greater than +35°C. When exceeded, de-rated operation shall be performed as required;

•Altitude: 2,000 m and below;

•Relative humidity: no greater than 50% when the relative temperature is +40°C. Higher relative humidity is allowed at a lower temperature: e.g. 90% at +20°C. However, the influence of accidental condensation that might occur in case of temperature variations shall be considered;

•The inclination upon installation shall not exceed 5°, and the cabinets in the same array shall be relatively aligned (conforming to GBJ232-82);

•The switchgear shall be installed at locations free from intense vibration and impact, and unexpected corrosion to elements.

Note: The users may consult with us should they have any special requirement.